Addressable Beam Detector

Buy High Quality Addressable Beam Detectors at Affordable Prices in Bulk

Addressable beam detectors have special IDs so that the control panel can easily locate their exact installation place. These detectors are specially designed for large and open spaces where the regular detectors cannot be effective in detecting the signs of fire. As soon as the devices detect the reduction in light, they send the signal to the control panel that triggers the alarms.

What is an Addressable Beam Detector?

An addressable beam detector is a detection device used in fire safety systems in large places. These devices cannot only detect fire smoke efficiently but also help the control panel to detect their exact location for immediate response. These devices are compatible with most of the fire safety systems and are also scalable if an individual expands their property area or adds another floor.

How Addressable Beam Detectors Work?

The working of these beam detectors can be understood with the following points:

Infrared: These detectors transmit a beam of infrared light, which reflects back after touching the opposite side of the wall.

Interference: When the smoke particles block the infrared beam, the detector immediately sends the signal to the control panel.

Triggers the Alarms: Upon receiving the signals control panel immediately triggers the alarm. Alerting the occupants about the fire breakout.

Major Benefits of Using Addressable Beam Detectors

Covers a Larger Area

A fire safety system that uses addressable beam detectors can monitor a larger area for the signs of fire. These devices are best for large properties or campuses to efficiently detect any type of fire smoke by infrared technology. Most commonly, industrial places like warehouses and manufacturing plants mostly use these fire detection devices.

Reduces False Alarm Triggers

Addressable beam detectors help reduce the false fire alarm triggers that are often activated by the traditional detector. It is because these detectors use infrared light-based technology to detect the smoke, which does not get affected by the outdoor factors like dust and debris.

Easy and Cost-Effective to Install

These types of smoke detectors are very cost-saving to install and easy to operate. The major reason for that is, they don’t use so much wire installation to set up and connect. The workers can finish setting them up in just a few minutes, and they will be good to use.

Easy to Maintain

These detectors have low maintenance requirements and do not require specific care to function for a long time. Once they are installed, they can monitor the home for several months without needing any investment or expense. Moreover, they support remote maintenance, and the workers don’t have to physically get to the height to repair them.

Where are the Addressable Beam Detectors Used?  

These devices are used in several places due to their reliability and remote maintenance ability:

Warehouses and Distribution Centers: These places have high ceilings where workers cannot reach on a regular basis, and because of this, these detectors are installed.  

Atriums: These are also large open spaces, where installing the traditional detectors will be very costly to cover the whole area. They use beam detectors as they can cover the complete space from a distance.  

Concert Halls and Sports Arenas: Addressable beam detectors in such high-ceiling spaces help to provide a cost-effective and low-maintenance fire safety system.

Shopping Malls and Other Commercial Places: Beam detectors are installed in commercial places as they can be hidden in the surface layer for discrete fire safety systems, providing a cleaner look to walls and ceilings.

How to Choose the Right Addressable Beam Detectors for Yourself?

Check the following points before making the final buying choice:  

Check the Size of Coverage Area

Make sure to check the complete size of the area you want to monitor using these detectors, which will reveal how many you will need. Also, make sure to measure the height of the ceiling so that you don’t have to access it on a regular basis.

Identify Reflective Surfaces and Things for False Alarms

Check the surroundings carefully and note all the reflective surfaces and objects that can trigger a false alarm. This will help you to avoid installing the detectors in their sight and make them more effective.

Type of Detectors

Now make sure you source the right type of addressable beam detectors that can effectively monitor the area with required features, including a light range between 5m to 100m, and compatible with addressable detectors.

Plan the Spots

Make a blueprint of the property and mark the positions carefully after practically assessing which spots you will need the detectors. They should cover the complete area to monitor for fire threats and work effectively.

Why to Choose DigiMRO for Buying Addressable Beam Detectors in Bulk?

DigiMRO is the best choice for buying addressable beam detectors in bulk because we offer genuine products from trusted brands at the best prices. Our platform makes it easy for system integrators to compare options and place large orders with a simple process.  You can see detailed information about the product and get bulk discounts. We provide reliable customer support for your convenience. DigiMRO not only helps to save time but also money by offering the best deals. We provide consistent stock and quality assurance, making it the best platform to source addressable beam detectors in bulk.